Mirasil is manufactured from an all acrylic polymer specially designed for use as a seal on resilient floor. It has excellent adhesion, excellent chemical resistance and protective properties when applied. Mirasil shows good wear, gloss and levelling properties, along with excellent water and detergent resistance. it also gives excellent compatibility with floor polish.

For sealing marble, vinyl, terrazo and other floor.

20.5 ± 0.5%
< 20 cps
8.5 - 9.5

Tile & Concrete Sealer, TCS-100, is based on a modified thermalplastic acrylic emulsion polymer with excellent adhesion, excellent chemical resistance and protective properties when applied on concrete substrate or on resilient tile. TCS 100 excellent adhesion property even extent to old concrete floors which have been cleaned, but still retain some embedded dirt or oil. When use as resilient tile sealer, TCS 100 shows good wear, gloss and levelling properties, along with excellent water and detergent resistance. It also gives excellent compatibility with floor polish.

For sealing concrete substrate, stone, marble, terrazo and resilient tile.

20.0 ± 0.5%
< 20 cps ( # 2/60/26°C )
7.5 - 8.5
1.02

MIRA LINK 2 IN 1 is a multi-purpose floor maitenance product. It can be used for two separate functions neccessary with high speed maintenance.
The two functions are :
     1. Restorer
     2. Recoating Finish
All of these functions are accomplished by varying the dilution of MIRA LINK.
MIRA LINK is based on a system of polymer and terpolymer with carefully controlled glass transition temperature which make it adaptable to a variety of high speed floor maintenance requirement.

1. RESTORER : The suggested dilution for this application is 1:4. If working on an area that is execessively soiled, a neutral cleaner should be used and the area damp mopped. The material diluted 1:4 with water is mopped over the area to be buffed. This area may be buffed with high speed machines immediately after it dries.
2. RECOATING FINISH : The recommended dilution for this applications is 1:1. After long periods of times, floors that are being maintained by high speed methods require "patching" because of traffic patterns. At that point, it is recommended that a single coal of this material be put on the floor. This can then be high speed buffed immediately after it dries.

14.5 ± 0.5%
8.0 - 8.5
1.015
< 10 cps (# 2/60/26ºC)
Off-White

Blended from a unique polymer and terpolymer system which make it adaptable to high speed maintenance requirement. unique ingredients allowing film movement under the buffing pad for easy removal and repair of scuff marks. Excellent flow and levelling. High gloss.

As a buffing compound for floor maintenance.

Cleans and polishes at the same time. Removes oil and grease marks with ease. Leaves a protective invisible film which also shines. Water based, will not emits hazadous hydrocarbon solvent.

Used in household, commercial and industrial premises for cleaning and polishing of stainless steel equipments, structures cabinets and tools

Alu-Brite is a cleaner-polish for aluminium surfaces. It is used to remove oxides from tarnished surfaces and at the same time polishes them to the original bright condition.

Specifically for the cleaning and polishing of aluminium surfaces, found in the industrial and commercial sector.

A non-viscous special blend of distillates, mineral oils and solvents for dust control treatment. Easy to apply and effective. After treatment on floor surfaces, the applied film has good resistance to staining and wetting.

As a dust allaying agent for floor surfaces.